Table of Contents
Advertisement
About the Teletext function
Some broadcasts include a Teletext service* in
which all programme information (title, date,
channel, recording start time etc.) is stored daily.
When recording a programme, the recorder
automatically takes the programme name from the
Teletext pages and stores it as the title name. For
details, see "TV Guide Page" on page 93.
Note that the Teletext information will not appear
on your TV screen. To view the Teletext
information on your TV screen, press t TV/
DVD on the remote to switch the input source to
your TV.
* not available in some areas.
z Hint
If you do not want to watch TV while recording, you can
turn off the TV. When using a decoder, make sure to
leave it on.
Notes
z
• After pressing
REC, it may take a short while to
start recording.
• You cannot change the recording mode while
recording or during recording pause.
• In the event of a power failure, the programme you are
recording may be erased.
• You cannot watch a PAY-TV/Canal Plus programme
while recording another PAY-TV/Canal Plus
programme.
• To use the TV Direct Rec function, you must first set
the recorder's clock correctly.
Checking the disc status while
recording
You can check recording information, such as
recording time or disc type.
Press DISPLAY twice during recording.
The recording information appears.
A Disc type/format
B Recording status
C Recording mode
D Recording time
Press DISPLAY to turn off the display.
3. Playing the Recorded
Programme (Title List)
+
- RW
HDD
RW
VR
To play a recorded title, select the title from the
Title List.
HDD
1
2
4
5
7
8
0
TITLE LIST
/
m
1
Press HDD or DVD.
If you select DVD, insert a DVD (see
"Inserting a disc" on page 36).
Playback starts automatically depending on
the disc.
2
Press TITLE LIST.
To show the extended Title List, press
TOOLS, select "Display List," and press
ENTER.
- RW
+
-
R
R
Video
DVD
3
6
9
M/m,
ENTER
TOOLS
M
H/X/x
,continued
39
Advertisement
Table of Contents
