Dtc P0132 Signal Voltage High (Scan Diagnostics) - Briggs & Stratton VANGUARD M490000 Repair Manual

DTC P0132 Signal Voltage High (Scan Diagnostics)

Step
1 1. Select the Dashboard icon in the left sidebar and then
the Troubleshooting tab.
2. Observe the HO
running.
2
NOTE: An HO
the Dealer tab.
3. Is reading 600-950 millivolts DC?
2 Is reading above 950 millivolts DC, but below 1014.8 millivolts DC? Go to DTC P0132 Non-Scan Diagnostics.
44
Action
S Sensor display with or without the engine
2
S Sensor display can also be viewed under
2
Yes
HO sensor circuit OK.
2
No
Go to step 2.
-