Kenmore 84092 Operating Instructions Manual

https://appliancetechmanuals.com
Before Operating Your Dryer
Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many sug-
gestions for best drying results.
To reduce the risk of fire, electric
shock or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Owner's Guide
before operating this appliance.
Operating Steps
Read "Drying Procedures" in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint filter is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet. Close the door.
4. Select the cycle and and settings for each load.
5. A suitable drying temperature, dryness level and
options will automatically be displayed for each
cycle. To change the temperature and dryness
level, press TEMP and DRYNESS until the desired
selections are made. To select an option, press
OPTIONS until the indicator for a desired option
flashes and press SELECT.
steps to delete an option. If a dryness level or
option is not available for a cycle,it will not light.
®
6. The changes you make will be remembered the
next time that cycle is selected. See the "Dryer
Settings Chart" for more details.
7. Press START to begin the cycle.
To pause the cycle or change settings,
•
press PAUSE/CANCEL once.To resume
the cycle, press START again.
To stop or change the cycle, press
•
PAUSE/CANCEL twice.
8. A signal will sound at the end of the cycle and
periodically during Wrinkle Rid when the Cycle
Signal option is selected. When the cycle
ends,remove items immediately and hang or
fold.
9. Clean the lint filter after every load.
Cycle Selection
Turn the Cycle Selector knob to the desired cycle.
For best results, follow the fabric care label
instructions on items to be dried. To change the
selection after the cycle has begun, press PAUSE/
CANCEL twice.
Auto Dry
Applies to Towels, Bulky, Normal, Perm Press, Sport
and Delicate cycles. Auto Dry cycles take the guess-
work out of drying time. The load will automatically be
Follow the same
dried at the selected temperature to the desired dry-
ness level. The dryer uses sensing bars to sense
the moisture level of the load as it tumbles through
heated air. Auto Dry cycles save time and energy and
protect fabrics. When the load has reached the
DRYER OPERATING INSTRUCTIONS
selected dryness level, it will continue to tumble, un-
heated, during a Cool Down period. This helps re-
duce wrinkling and makes items easier to handle dur-
ing unloading.
Drying time varies depending on size and dampness
of load and fabric type. If the load is too small or
almost dry, the sensing bars may not detect enough
moisture to continue the cycle and the cycle may end
after a few minutes. Select a Timed Dry setting to dry
such loads.
Room temperature and humidity, type of installation
and electrical voltage or gas pressure can also affect
drying time.
Towels
Select this Auto Dry cycle for towel loads.
Bulky
Select this cycle to dry a comforter, blanket, sleeping
bag or similar item.
Normal
Select this Auto Dry cycle for cotton items.
Perm Press
Select this Auto Dry cycle to dry cottons and blends
with a no-iron finish.
Sport
Select this Auto Dry cycle to dry small loads of
lightweight, synthetic apparel worn for working out,
running, swimming, cycling, tennis and similar
activities.
Model 84092/94092
PN 134524300B (0501)