Hyundai KONA N 2022 Owner's Manual page 270

1. Press the 'Launch control' tab.
2. Press the '< (Left)' or '> (Right)' to set
the engine RPM for launch control.
3. Press 'Activate' to enter Launch
Control ready state.
4. Press 'Reset RPM' to reset engine
RPM to default launch control engine
speed.
Launch control on and off
1. Select N mode (N mode indicator will
illuminate on the cluster) or select
SPORT+ for the engine mode in
CUSTOM mode.
2. Check that the ESC mode is ESC
SPORT or ESC OFF. If not, press ESC
OFF button to set the ESC mode to
ESC SPORT or ESC OFF (Indicator
illuminates on the cluster). (Electronic
Stability Control (ESC) does not
operate when ESC OFF.)
3. Shift the gear to D (Drive) or M
(Manual shift mode). (When Manual
shift mode is selected, driver must
shift manually.)
4.
control' to set engine RPM from the
Infotainment system screen. After
setting RPM, press 'Activate'.
5. Align the steering wheel straight.
6. Depress the brake pedal to the
maximum with your left foot.
7. While depressing the brake pedal
with your left foot, quickly and fully
depress the accelerator pedal with
your right foot. Launch control will
OOSN061026L
be in the ready state. The message
'Launch Control Ready' will appear on
the cluster. If necessary, adjust engine
RPM with +/- switch on the steering
wheel.
8. A smooth, quick release of the
brake pedal within 8 seconds,
while maintaining full depression
of the accelerator pedal will initiate
launching of the vehicle. The message
'Launch Control Active' will appear on
the cluster.
9. Launch Control will deactivate when
the accelerator pedal is released.
If you depress the brake pedal and
the accelerator pedal at the same
time and then release the accelerator
pedal, Launch Control is will be
cancelled.
Launch Control is available again
after the car is cooled down for at
least 2 minutes.
If you do not launch the vehicle
within 8 seconds in launch control
"READY" state, launch control will be
automatically aborted.
CAUTION
06
6-45