Recommended Lubricants And Capacities - Hyundai KONA N 2022 Owner's Manual

RECOMMENDED LUBRICANTS AND CAPACITIES

To help achieve proper engine and powertrain performance and durability, use only
lubricants of the proper quality. The correct lubricants also help promote engine
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant
Engine oil
*1 *2 *3
(drain and refill)
Recommends
Dual clutch
transmission fluid
Coolant
Brake fluid
Fuel
Refer to the recommended SAE viscosity numbers on the next page.
*1 :
For the best performance of braking and ABS/ESC functions, you should use genuine
*2 :
brake fluid that conform to standards. (Standards: SAE J1704 DOT-4 LV, ISO4925 CLASS-6
and FMVSS116 DOT-4)
An engine oil displaying this American Petroleum Institute(API) Certification
*3 :
Mark conforms to the International Lubricant Specification Advisory
Committee (ILSAC). It is recommended to only use engine oils that uphold
this API Certification Mark.
Requires < API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade
*4 :
engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine
oil filter must be replaced as indicated severe maintenance condition.
Volume
5.49 US qt.
3.4 US qt.
Gear oil
2.58 US qt.
Control oil
7.3 US qt.
0.74 ~ 0.85 US qt
13.21 US gal.
(50 )
Classification
SAE 0W-30 API SN PLUS/SP or
ILSAC GF-6
GS WDCTF HD G (GS CALTEX)
GS WDCTF HD H (GS CALTEX)
Mixture of antifreeze and distilled
water (Ethylene-glycol with
phosphate based coolant for
aluminum radiator)
DOT4
Refer to "Fuel Requirements" in the
Introduction chapter.
02
* 4
2-11