Skipping Blank Spaces (Blankskip) . 40 Selecting The Tape Type; Dolby* B Noise Suppression; Cd Changer Mode; Switching To Cd Changer Mode - Blaupunkt Canberra C31 Operating Instructions Manual

Press the MENU button <.
Keep pressing the
; until "BLK SKIP" appears in the
display.
Press the or
switch blankskip on/off.
When you have finished making your
changes,
press the MENU button <.
If you play a "metal" or "CrO
you should set the tape type to "MTL
ON".
To select the tape type,
press button 1 (MTL) =.
"MTL ON" or "MTL OFF" appears brief-
ly in the display.
If you play cassettes that were record-
ed using the Dolby B process, you
should switch on the Dolby feature.
Press button 5 (
If the Dolby feature is activated,
up in the display.
* Noise suppression system manufactured under license
from Dolby Laboratories. The word "Dolby" and the dou-
ble-D symbol are trademarks of Dolby Laboratories.
or button
button ; to
" tape type,
2
) =.
lights
Note:
Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
Keep pressing the CD•C button 9
until "CHANGER" appears in the
display.
Playback begins with the first CD that
the CD changer detects.
To move up/down from one CD to an-
other,
press the or
several times.
To move up/down from one track to an-
other on the current CD,
press the or
several times.
To quickly select tracks backwards or
forwards,
keep one of the
pressed until fast reverse / forward
track selection begins.
button ; once or
button ; once or
buttons ;
/
41