Pausing During Play; Switching The Radio Monitor On/Off; Skipping Blank Tape; Selecting Tape Type - Blaupunkt Daytona Beach C34 Operating And Installation Instructions

be listened to. This requires the
"Radio monitor" function to be
switched on.

Pausing During Play

To interrupt tape play
➮
Press button 3 E 9.
Play is interrupted and "PAUSE"
appears in the display.
➮
Press button 3 E 9 again to
resume play.
Switching the Radio Monitor
On/off
Note:
The radio monitor can only be set if
G
a cassette is being played.
➮
Press the MENU button 8.
➮
Press the % or fi button 7 until
"RM ON" or "RM OFF" appears in
the display.
➮
Press the # or @ button 7 to
switch the radio monitor on or off.
When you have finished making your
changes,
➮
press the MENU button 8 once.

Skipping Blank Tape

You can automatically skip sections of
blank tape that last longer than 10
seconds. This requires the blank skip
function to be activated.
Note:
The blank skip can only be set if a
G
cassette is being played.
CASSETTE MODE
Switching Blank Skip On/Off
➮
Press the MENU button 8.
➮
Press the % or fi button 7 until
"BLK SKIP" appears in the display.
➮
Press the # or @ button 7 to
switch the blank skip function on or
off.
When you have finished making your
changes,
➮
press the MENU button 8 twice.

Selecting Tape Type

If you are playing a Metal or CrO
you should set the tape type selector to
"METAL ON".
To select the tape type
➮
Press button 1 MTL 9.
Either "METAL ON" or "METAL OFF" will
appear briefly in the display.

Dolby* B Noise Reduction

You should switch on the Dolby function
whenever you play tapes recorded
using the Dolby B process.
➮
Press button 6
"DOLBY ON" appears briefly in the
display.
When the Dolby function is switched on,
shows in the display.
➮
To switch Dolby function off, press
9 again.
button 6
*Noise reduction system manufactured
under licence from Dolby Laboratories. The
word Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
tape,
2
9.
15