Tuning Into A Station; Setting The Sensitivity Of The Station Search Mode; Storing Stations - Blaupunkt Canberra C31 Operating Instructions Manual

Five stations can be stored on each
memory level.
Briefly press the BAND (TS) button
2 or the FMT button 2 to switch
between the memory levels and
frequency ranges.
There are various ways of tuning into
a station.
Press the or
The unit tunes into the next receivable
station.
You can also tune into stations manu-
ally.
Press the or
Note:
You can only tune into stations
manually if the RDS function is de-
activated.
If a radio station provides several pro-
grammes, you have the option of
browsing through its so-called "broad-
casting network".
Press the or
move to the next station on the
broadcasting network.
Note:
The RDS function must be activat-
ed before you can use this fea-
ture.
34
button ;.
button ;.
button ; to
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use the scan or Travelstore function.
You can configure the radio to only
tune into stations with a strong recep-
tion or to also tune into those with a
weak reception.
Press the MENU button <.
Keep pressing the
; until "SENS HI" or "SENS LO"
appears in the display.
The display shows the currently set
value for sensitivity. "SENS HI6" means
that the tuner is highly sensitive. "SENS
LO1" means it is set to the lowest sen-
sitivity setting.
If "SENS LO" is selected, "lo" lights up
in the display.
Set the required sensitivity using
buttons ;.
the and
When you have finished making your
changes,
press the MENU button <.
Select the required FM1 / FM2 /
FMT memory or one of the MW /
LW frequency ranges (only FM in
the case of the Freiburg C31 and
Las Vegas DJ31 units).
Tune into the required station.
or button