Table of Contents
Advertisement
A double beep sounds and the display
returns to standby. Your handset is now
registered to the Quartet 2010 base unit.
You are Handset 1 and have taken an
incoming call and wish to transfer it to
another Quartet 2010 handset that is
registered to your base unit.
During the call
TRANS Press
TRANS
and TRANSFER X, where X is the number
of one of the registered handsets.
Enter the number of the handset you
KEYPAD
wish to transfer the call to (
Press
. The display shows HANDSET 1
OK
OK
and
.
Press
TALK
base unit. Your call has been transferred.
The display returns to standby.
If the call is not answered by the
handset you have tried to transfer the
call to after 30 seconds then the original
handset will ring again.
. The display shows
2, 3, 4
or return the handset to the
).
Advertisement
Table of Contents
