If The "-" Is Blinking In The Gear Position Indicator While Riding (Gl1800Bd/Da) - Honda Goldwing GL1800 2019 Owner's Manual

If the "-" is Blinking in the Gear Position Indicator While Riding (GL1800BD/DA)

If the "-" is blinking in the gear position
indicator while riding, you may have a
serious problem with the Dual Clutch
Transmission system.
Park your vehicle in a safe place and have
your vehicle inspected by dealer
immediately.
It may be possible to ride your vehicle by
following the steps below.
1. Turn the ignition switch to
2. Turn the ignition switch to
start the engine.
If you cannot start the engine:
Turn the ignition switch to (Off) and
move the vehicle back and forth slightly (to
disengage the gears).
Turn the ignition switch to (On) again and
start the engine.
If you still cannot start the engine:
Start the engine while applying the brake
lever or pressing the brake pedal.
If you can shift from N to D range:
When a gear position is shown in the gear
position indicator, you can ride in that gear.
Take your vehicle to your dealer riding at a
safe speed.
If you can't shift from N to D range and
the "-" is blinking:
Possible damage to the DCT is preventing
you from riding.
Have your vehicle inspected by your dealer
(Off).
immediately.
(On) and
197