Removing & Installing Body Components; Battery - Honda Goldwing GL1800 2019 Owner's Manual

Removing & Installing Body Components

Battery

❙
Removal
Make sure the ignition switch is turned to
(Off).
After turning the ignition switch to
wait more than 60 seconds and then
remove the negative cable of the battery.
Because the electrical system may not
function correctly.
1. Remove the left side cover.
2. Disconnect the negative - terminal
from the battery.
3. Disconnect the positive + terminal from
the battery.
GL1800/B
Positive + terminal
Negative - terminal
GL1800BD/DA
(Off),
Negative - terminal
P. 168
2
4. Remove the battery holder bolt.
5. Swing the battery holder as shown to
avoid interference against the seat.
6. Remove the battery holder from the
hook.
Positive + terminal
7. Remove the battery taking care not to
drop the terminal nuts.
Battery holder
Battery holder bolt
Hook
Battery holder
continued 165