Side Stand - Honda Goldwing GL1800 2019 Owner's Manual

Side Stand

Checking the Side Stand
Side stand spring
1. Check that the side stand operates
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and
lubricate the pivot bolt with clean
grease.
2. Check the spring for damage or loss of
tension.
3.
GL1800/B
Sit on the vehicle, shift the transmission
to Neutral, and raise the side stand.
GL1800BD/DA
Sit on the vehicle and raise the side
stand.
180
4.
GL1800/B
Start the engine, pull the clutch lever in,
and shift the transmission into gear.
GL1800BD/DA
Start the engine and press the D side of
N-D switch to switch the transmission
into AT MODE (D).
5. Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your vehicle inspected by your dealer.