Please Do Not Return This Product To The Store - Bissell SPOTBOT 33N8 Series User Manual

T
roubleshooting
Cleaner will not run
Possible causes
1. Power cord not plugged in
2. Blown fuse/tripped breaker
3. Hose not removed from receiver
4. SpotBot shut off automatically during use
Unusual or odd noise
Possible causes
1. Clean water/solution tank is out of fluid
Reduce or no spray
Possible causes
1. Spray tip clogged on Tough stain brush
2. Clean water/solution tank is out of fluid
3. Clean water/solution tank is not inserted into the unit securely
No suction
Possible causes
1. Tank is full
2. Dirty water/collection tank latch is not down
3. Black valve on the dirty water/collection tank is missing
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
w w w . b i s s e l l . c o m
Manual cleaning
Remedies
1. Check electrical plug
2. Replace household fuse or reset breaker
3. Remove hose
4. Press start button to resume manual cleaning
Remedies
1. Fill clean water/solution tank
Remedies
1. Clean spray tip
2. Fill clean water/solution tank
3. Gently press the clean water/solution tank until you see
"bubbles" coming from the base of the tank
Remedies
1. Empty tank
2. Push latch down, securely into place
3. Replace black valve into dirty water/collection tank
8 0 0 . 2 3 7 . 7 6 9 1
13