Parameters; Parameter Types; Module/Channel Parameters - Siemens SIMATIC ET 200SP HA Equipment Manual

Parameters

5.1

Parameter types

Definition
You define and thereby influence the functions supported by the module operation of the I/O
module via the parameter types.
5.2

Module/channel parameters

Definition
Module/channel parameters are specific parameters whose configuration can affect the entire
module or channel.
Description
The following module/channel parameters are available:
Parameters
Diagnostics, Missing supply
voltage L+ (Page 18)
Diagnostics, Wire break
(Page 18) 1
Wire-break check (Page 18)
Channel activated
(Page 19)
Hardware interrupts positive
edge (Page 19)
Hardware interrupts nega‐
tive edge (Page 19)
DI 32x24VDC HA
Equipment Manual, 10/2021, A5E48262828-AB
Value range
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
Default Parameter re‐
assignment in
RUN
Enabled Yes
Enabled Yes
Enabled Yes
Enabled Yes
Disabled Yes
Disabled Yes
5
Efficiency range
Module
Channel
Channel
Channel
Channel
Channel
17