Bissell IllumiClean 68G9 SERIES User Manual

Bissell vacuum cleaner user manual

Advertisement

IllumiClean
U S E R ' S G U I D E
6 8 G 9 S E R I E S 2 2 0 - 2 4 0 v
Safety Instructions
3
Product View
4
Assembly
5-6
Operations
7-9
Maintenance and Care
10-12
Troubleshooting
13
Consumer Services
14
Replacement Parts
15
Warranty
16

Advertisement

Table of Contents
loading

Summary of Contents for Bissell IllumiClean 68G9 SERIES

  • Page 1 IllumiClean U S E R ’ S G U I D E 6 8 G 9 S E R I E S 2 2 0 - 2 4 0 v ™ Safety Instructions Product View Assembly Operations Maintenance and Care 10-12 Troubleshooting Consumer Services...
  • Page 2 Your BISSELL canister vacuum is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
  • Page 3: Important Safety Instructions

    Bs 1362) fuse is fitted in the carrier contained in the plug. (spares may be obtained from your BIssell supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock...
  • Page 4: Product View

    roduct view Flex Hose Swivel Hose Variable Suction Power Control Power Button Bag Change Indicator Post-Motor HEPA Media Filter Carry Handle Upholstery Tool Crevice Tool w w w . b i s s e l l . c o m Handle Air Flow Regulator Multi-Surface...
  • Page 5: A Ssembling Your Vacuum

    ssembling your vacuum Connect swivel hose by squeezing both locking buttons and inserting it into the suction opening on the canister. Once the swivel hose is inserted in the suction opening, release the locking buttons. Connect telescoping extension wand to the handle end of the flex hose.
  • Page 6 ssembling your vacuum Once assembled, you can store your vacuum in one of two positions: Storing in the in-use position: 1. To store with the floor nozzle attached, insert the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum.
  • Page 7 perations Power cord the power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. there is also a red line, which indicates the end of the usable cord.
  • Page 8: Special Tools

    Special tools your bISSEll Illumiclean is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile bare floor vacuum cleaner and above floor vacuum cleaner when you select one of the special tools. floor nozzle: Use to vacuum carpets, rugs and bare floors.
  • Page 9 High filtration dust bag the bISSEll Illumiclean features a non-woven, high filtration dust bag that captures more fine dust than traditional paper dust bags, giving off less dust emissions.
  • Page 10: Dust Bag Replacement

    aintenance and care Dust bag replacement Unplug the vacuum from electrical outlet. Open the dust bag compartment by lifting up on the latch on the door on the front of the vacuum. Lift out the dust bag holder and dust bag. Release the dust bag from the holder by pressing the dust bag holder clip and pulling the dust bag out of the holder.
  • Page 11: Cleaning The Pre-Motor Filter

    aintenance and care Cleaning the pre-motor filter the pre-motor filter protects the motor from dirt and dust particles. Unplug the vacuum from electrical outlet. Open the dust bag compartment by lifting up on the latch on the door at the front of the vacuum.
  • Page 12: Maintenance And Care

    aintenance and care Replacing the post-motor HEPA media filter the post-motor HEPa media filter assists in the filtration process to return clean air to the room. Unplug the vacuum from electrical outlet. Remove the filter door (located on the rear of the vacuum) by pulling up on the filter door latch.
  • Page 13: Troubleshooting

    6. Crack or hole in flex hose other maintenance or service not included in the manual should be performed by an thank you for selecting a bISSEll product. Please do not return this product to the store. w w w . b i s s e l l . c o m...
  • Page 14 In the UK, Australia, New Zealand, the middle east or Africa, call BIssell Consumer services at the numbers below and we will give you the location of a BIssell Authorized service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair.
  • Page 15 - BISSELL IllumiClean Item Part no. 203-7270 203-7268 203-7269 203-7267 203-7257 203-7256 203-7273 203-7272 203-7271 203-7274 w w w . b i s s e l l . c o m Part name Dust Bag (3pk) Pre-motor Filter...
  • Page 16: Limited Two-Year Warranty

    *eXCePTIoNs AND eXClUsIoNs identified below, BIssell homecare, Inc., will replace (with new or remanufactured components), at BIssell’s option, free of charge from the date of purchase by the original purchaser, for two years any defective or malfunctioning part do to manufacturers defect.

This manual is also suitable for:

Illumiclean

Table of Contents