Please Do Not Return This Product To The Store - Bissell SPOTBOT 1200/7887 User Manual

T
roubleshooting
Cleaner will not run
Possible Causes
1. Power cord not plugged in.
2. Blown fuse/tripped breaker.
3. Hose not removed from receiver.
Unusual or Odd Noise
Possible Causes
1. Clean/Solution tank is out of fluid.
Reduced or No Spray
Possible Causes
1. Spray Tip clogged on Tough Stain Brush.
2. Clean/Solution tank is out of fluid.
3. Clean/Solution tank is not inserted
into the unit securely.
No Suction
Possible Causes
1. Tank is full.
2. Dirty/Collection tank latch is not down.
3. Black Valve on the Dirty/Collection
Tank is missing.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

w w w . b i s s e l l . c o m
ug120-4070_1200_408.indd 13
Manual/Hose Cleaning
For any question or concern, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691
Remedies
1. Check electrical plug.
2. Replace household fuse or
reset breaker.
3. Remove Hose.
Remedies
1. Fill Clean Solution Tank.
Remedies
1. Clean Spray Tip.
2. Fill Clean/Solution Tank.
3. Gently press the Clean/Solution
Tank Until you see "bubbles"
coming from the base of the tank.
Remedies
1. Empty tank.
2. Push latch down, securely
into place.
3. Replace Black Valve into Dirty/
Collection tank.
8 0 0 . 2 3 7 . 7 6 9 1
13
10/14/08 1:07:48 PM