Multimediacard Troubleshooting; Recovering Data Files - Honeywell BW GasAlertMicro User Manual

MultiMediaCard Troubleshooting

The following error message scrolls on the LCD during start-
up if the MMC card is not inserted.
The card is not required for operation. The error message
displays as a reminder.
A new MMC card is automatically formatted during start-up
when it is inserted into the detector. The LCD displays the
following message before the detector begins formatting.

Recovering Data Files

If the MMC card is reformatted or erased accidentally by the
computer application, the recorded data file can be
recovered.
Ensure the card is inserted correctly in the card reader. If the
recorded data file is not visible, ensure the following:
• The card reader is visible in the My Computer
window.
• If not, verify that the card reader is installed
correctly and that the connections are secure.
• In the Removable Disk drive window, verify that
All Files is selected in the file types field.
Place the MMC card back into the detector. When the
detector reformats part of the card it should be visible.
If the data file LOGFILE0.CSV is still not visible, format the
MMC card in Windows and then complete the following:
1. Remove the MMC card from the card reader.
2. Insert the MMC card into the detector and allow the
detector to reformat part of the MMC.
3. Remove the MMC card from the detector and insert
it back into the card reader.
4. From the computer, double-click on My Computer.
5. Select the drive that corresponds to the card
reader.
6. The recorded data file LOGFILE0.CSV should be
visible.
GasAlertMicro
MultiMediaCard (MMC)
51