Combustible Sensor Measuring Selection - Honeywell BW GasAlertMicro User Manual

To enable/disable the safe display option, complete the
following:
1. From the user options menu, use G or H to scroll
to the SAFE dISPLAY option.
2. Press C to select this option.
The LCD displays the current mode (On or OFF)
and then returns to the FiniSh OPtionS screen.
3. Use G or H to scroll to a new user option, or press
C to exit user options and return to normal
operating mode.
or

Combustible Sensor Measuring Selection

The LEL SEn unitS option is used to select how the
measurements are displayed. The options are 0-100% LEL
or 0-5.0% vol.
The detector is shipped with the combustible
sensor set to measure and display combustible
gases in the 0-100% LEL (lower explosive limit)
range.
The detector can be set to measure and display methane in
the 0-5.0% by volume range.
Percent by volume measurements apply to
methane only.
GasAlertMicro
User Options Menu
Note
Note
19