3. Disassembly and Reassemble
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully.
-
Use the Samsung Open Jig and Cushion to remove the Rear Cover.
•
CAUTION
-
Recommended Torque for Cabinet/Stand screws : 10 ~ 12kgf
•
3-1. TV Disassembly
Description & Screws
1
Place the TV on the Protection Cushion.
2
4EA screws on TV stand guide. And then remove
stand.
3
Insert the Open Jig tool completely into bottom of the
rear cover(1) and following directions 2→3→4
Open Jig Tool, Protection Cushion (curved models Only)
A strength of Torque can be changed depending on the situation.
3. Disassembly and Reassemble
Picture Description
3-1