3. Disassembly and Reassemble
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully.
-
Use the Samsung Service tool to disassemble the cabinet.
•
CAUTION
-
Recommended Torque for Cabinet/Stand screws : 10 ~ 12kgf
•
3-1. TV Disassembly
Description & Screws
1
Remove the Deco (if Deco is installed) and Place
the Frame TV on the table.
2
Remove the two stands by pulling them down.
•
ASSY STAND P-COVER TOP LEFT
•
ASSY STAND P-COVER TOP RIGHT
Recommend to use the Samsung Service tool
A strength of Torque can be changed depending on the situation.
Picture Description
L
3. Disassembly and Reassemble
R
3-1