Belkin OmniView F1D104-USB User Manual page 8

Installation Instructions
(continued)
Once you have plugged in the USB cable, Windows will detect
®
the built-in 4-port hub, PS/2 Keyboard, and Mouse I/F. Even if
Windows asks for drivers, the drivers are built in. The USB KVM
®
uses standard HID-Class (Human Interface Device) drivers. So all
you need to do is keep hitting "NEXT" until Windows loads the
®
drivers. Only when the drivers are loaded can you start using the
devices connected to the USB KVM Switch.
See below:
Click NEXT
Click NEXT
6