Table of Contents
Advertisement
Installation Instructions
Connecting a Macintosh
Using a USB KVM Cable Kit (Belkin F3X1895-XX), connect the VGA
and USB cables to an empty port at the back of the USB KVM.
Rear View USB KVM
Connect the other ends of the USB KVM Cable to the
appropriate ports at the back of your Mac. When connecting the
USB cable, plug it into an unused USB port. If all USB ports are
used up, unplug a USB device that is neither a keyboard or a
mouse.
Once you have plugged in the USB cable, Macintosh
detect the built-in 4-port hub, PS/2 Keyboard, and Mouse I/F.
The USB KVM uses standard HID-Class (Human Interface
Device) drivers so no other action is required.
to the USB KVM Switch
®
USB "B"
8
(continued)
HDDB15
F3X1895-XX
USB "A"
Back of Mac
G3 or G4
®
OS will
Advertisement
Table of Contents
