Table of Contents
Advertisement
Installation Instructions
Front View USB KVM
USB Mouse
Connecting a Windows-based PC to the USB KVM Switch
Using a USB KVM Cable Kit (Belkin F3X1895-XX), connect the VGA
and USB cables to an empty port at the back of the USB KVM.
Connect the other ends of the USB KVM Cable to the
appropriate ports at the back of your PC. When connecting the
USB cable, plug it into an unused USB port. If all USB ports are
occupied, unplug a USB device that is NOT a keyboard or a
mouse. You need the keyboard and mouse to control Windows
when it starts detecting the USB KVM Switch components.
OmniView
USBKVMS
WITCH
F3X1895-XX
USB "B"
5
(continued)
PS/2 Mouse
PS/2 Keyboard
HDDB15
USB "A"
Back of
PC
VGA MONITOR
RJ45 NETWORK
®
Advertisement
Table of Contents
