Table of Contents
Advertisement
The SELECT Button:
Pressing the SELECT button cycles you through
all the ports, including inactive ports.
Keyboard hot key commands (REQUIRES PS/2 KEYBOARD):
You can also conveniently command the USB KVM to switch
ports through simple keyboard key sequences. To send
commands to the USB KVM, the SCROLL LOCK key must be
pressed twice within 2 seconds. You will hear a beep for
confirmation. Below are the different commands:
You can switch directly to any port by giving the USB KVM the
PORT number. For instance, if you press [SCROLL LOCK]
[SCROLL LOCK] [2], the computer on PORT 2 will be selected.
Usage (continued)
OmniView
USBKVMS
WITCH
Switch to PREVIOUS ACTIVE port
Switch to NEXT ACTIVE port
Directly switches to port Y
10
Advertisement
Table of Contents
