Using The Tv - Audiovox VE727 Owner's Manual

Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal before
searching TV channels
1. Connect the TV antenna.
2. Connect the AC power cord.
3. Press the POWER button to turn on the unit.
4. Press the DVD/TV/RADIO button (the FUNCTION button on the
remote) to select TV mode.
Manual searching for TV channels
1. Press the TV MENU button, then press the
SETTING.
2. Press the button to select ANTENNA. Use the
Air or CATV.
3. Use the button to select Auto Scan.
4. Press the ENTER button to enter sub menu of Auto Scan.
5. Use the button to select "Start to Scan" in the sub menu.
6. Press the ENTER button to start the search for TV channels.
7. The screen will show the first received channel when auto search is
completed.
Watching Television
Viewing a television station after the auto/manual search for channels.
1. Press the FUNCTION button to TV mode.
2. Press the CH buttons (the
the number button on the remote to select the channel you want to watch.
• For channels 1 to 9, enter one-digit channel number.
• For channels 10 to 99, enter the two-digit channel number.
• For channels 100 or over, enter three-digit channel number.
Note:
• When a channel is selected, the channel number is displayed on the top right corner of the screen. This
number will disappear after a few seconds.
• When MUTE is pressed, the sound is mute and the "L O" indicator always blinks on the LCD display
until MUTE is pressed again or VOL is pressed.
ATSC TV mode:
Press the DISPLAY button, the upper window will
pop up, then press the DISPLAY button again,
the lower window will pop up. Press the DISPLAY
button once to exit.
NTSC TV mode:
Press the DISPLAY button, the upper window will
pop up, then press the DISPLAY button once to
exit.

USING THE TV

button to TV CHANNEL
or button to select
CH+ or CH- button on the remote) to select a channel, or press
- 24 -
RF CH 13
Found 0
PRESS MENU TO EXIT AUTO SCAN