Symbol LL 425 Quick Reference page 3

3
Set Up
MAGSTRIPE
SCANNER
Connect the appropriate input devices. See the LL 425 User's
Guide.
Connect the appropriate interface cable assembly. See the LL 425
Interface Guide for more information.
When the host can provide sufficient power for the LL 425 and
a 5V scanner, the interface cable assembly is set up at the factory
with a Power Selection Plug installed. To power the LL 425 (and
connected devices) from an external power supply, remove the
Power Selection Plug and connect a power supply. The Scanner
Port is set at the factory for 5V on the I000A model, and 12V on
the I000B. To change this setting, refer to the LL 425 User's
Guide.
Quick Reference