Figure 2: Door System Settings - Grandstream Networks GDS3710 Configuration Manual

https://arttel.ru/
1. Choose the action to be taken when the doorbell is pressed, three options are available:
• Call Doorbell Number: when Doorbell is pressed, a call will be made to the "Number Called
When Door Bell Pressed"
• Control Doorbell Output (Digital Output 1): when Door Bell is pressed electronic lock for Output
1 is opened.
• Both Of Above: When selected, both Call Doorbell Number and Control Doorbell Output options
are enabled.
In our case we will choose "Call Doorbell Number".
2. Enter the IP address and port number of the GXV3275 which is 192.168.5.124:5062 for the second
account on the GXV3275.
3. Enter the "Remote PIN to Open the Door" in order to open the door via DTMF while in active call with
the GDS3710.
4. Click
Make sure that the Direct IP Call feature is active from the GDS3710 WebGUI under "SIP Settings > SIP
Advanced Settings" then click on "Enable Direct IP Call".
https://arttel.ru/shop/ip-domofony/grandstream-gds3710

Figure 2: Door System Settings

in order to apply changes.
Connecting GDS3710 with GXV32XX Configuration Guide
P a g e | 5