Lcd Display - Napa Carlyle ETW38 Instruction Manual

lcD DISPlAY

• Light: 110%: The Red LED Light & Audible Buzzer Will
Sound Indicating a Torque Overage Exceeding 104% of
the Target Torque Setting.
100%: The Green LED Light & Audible Buzzer Will
Sound Indicating a Torque Reading of 97%-104% of the
Target Torque Setting
90%: The Yellow LED Light & Audible Buzzer Will Sound
Indicating a Torque Reading of 90%-97% of the Target
Torque Setting.
• LCD Display: CCW: Indicates that the wrench has
taken a measurement in the counter-clockwise direction.
Note: An arrow will be displayed pointing vertically to
the CCW lettering on the face when a measurement is
taken in the CCW rotation. The arrow will also be
present if the memory is accessed for a previous
measurement taken in the CCW rotation.
M: Indicates MEMORY. There are 3 torque
measurement memory storage locations.
Ft-Lb/N.M/Kg-Cm/In-Lb: The arrow will point to the unit
of measurement the wrench is currently in.
Note: In memory mode the arrow will point to the unit of
measurement the reading was taken in.
• Keys:
U : changes the unit of measurement and enters the
torque setting mode.
+ : increases the torque setting.
- : decreases the torque setting.
ON/OFF : power on / off. Press the on/off key
momentarily to set the wrench to its maximum torque
value.
ETW38 and ETW12 7 Rev. 02/27/15