American DJ Pro Scratch 1 User Manual page 23

BASIC OPERATIONS - FX MIX
FX MIX MODE:
This function allows you to use the effects to transfer from one track to another, one track
to a sample, or one sample to another. FX Mix uses the effects and the FLASH BUTTONS (6). The FX Mix
function will only work with samples and cue points programmed in the any of the three FLASH BUTTONS (6).
The procedure below list the steps to activate the FX Mix Mode. In the following example we will you the SKID
Effect to transfer from one track to a programmed sample.
STEP TWO:
After you have activated FX Mix Mode, select an effect. In this
example we will choose the SKID Effect. Choosing the SKID Effect we create a
braking effect.
American DJ
POWER
¤
OFF
ON
Pro-Scratch1
PROFESSIONAL CD PLAYER
1 2 3 4 5 6 7 8 9 0 PROGRAM NONSTOP
18
AUTO
--
CUE BPM
EFFECT CUE ELAPSED TOTAL REMAIN
KEY
BEAT SYNC.
LOCK
SINGLE
88 00 : 00 00 160
LOOP
--
. BPM
RELOOP
T M S F PITCH
EJECT/
STOP
SEARCH SCRATCH/ SKID/COAST HOLD FLANGER/ TRANS/ PARAMETER SGL/CTN
FADE ECHO PAN
ON/OFF ON/OFF
8%/12%/16% ON/OFF
FLASH 1 FLASH 2 FLASH 3
MEMORY SAMPLER
PITCH BEND
SEAMLESS
IN OUT RELOOP
LOOP
TRACK
BOP
FX SAMPLE PITCH
a
MIX
ENTER
REV FWD
CUE
DIGITAL TURNTABLE
DISC IN/OUT SLOT
STEP FOUR:
To initiate the FX Mix , tap the BOP/ENTER BUTTON (20). At this
point you may continue the FX with the current track. If you follow steps one and
four, you will initiate the FX mix on the current track. For example; If you used the
brake effect for your effects mix, following steps one and four will initiate a brake
effect in current track and then continue with the track once the brake effect has
ended. You must be in continuos play mode for this effect to operate properly.
STEP ONE: Be sure you have created a sample and stored it in to the
FLASH 3 BUTTON (6)(see creating a sample on page). After a sample has
been created and store, begin playback on
(11) to activate the FX Mix Mode.
Figure 48
STEP THREE:
When you are at the point in the track you wish to begin the
sample, press the FLASH BUTTON 3 (6).
now end the current track and beginning to play the sample stored in the Flash 3
bank. The track will end in a brake effect and then immediately being to play you
stored sample in Flash Bank 3.
Figure 50
American DJ AUDIO • Pro Scratch 1™ INSTRUCTION MANUAL • PAGE 23
®
a track. Select the FX MIX BUTTON
Figure 49
Pressing the
FLASH BUTTON 3 (6) will
Figure 51