Table of Contents
Advertisement
BASIC OPERATIONS (CONT.)
3. STARTING PLAYBACK - Figure 11
Insert an audio CD as describe on page 10 (LOADING/EJECTING DISCS).
Pressing the PLAY/PAUSE BUTTON (15) with an audio CD inserted will
immediately start playback. The PLAY (41) indicator will glow as soon as playback
begins. The point at which playback starts (cue point) will automatically be stored
in the memory as the cue point. The unit will return to this cue point (the point
at which playback started) when the CUE BUTTON (13) or the BOP BUTTON
(20) is pressed.
4. AUTO CUE
When a disc is loaded, the unit will automatically set a cue point to the first
audio source, usually the beginning of track 1. If a new track is selected before
the PLAY BUTTON (15) is pressed, a new CUE POINT will be set to reflect
the new starting point.
5. STOPPING PLAYBACK - Figures 11 & 12
Stopping playback will not stop the drive mechanism, but merely pause or cue the
track, this functions allows the unit to begin play instantly. The drive mechanism
will only stop if a disc is ejected or the unit has gone in to sleep mode. There are
two ways to stop (pause) playback:
1) Press the PLAY/PAUSE BUTTON (15) during playback. This will pause playback
at the exact same point the PLAY/PAUSE BUTTON (15) was pressed.
2) Press the CUE BUTTON (13) during playback. This will pause playback and
return the track to the last set cue point.
6. PAUSING - Figure 11
This function pauses playback at the exact same point the PLAY/PAUSE BUTTON
(15) was pressed. Pressing the PLAY/PAUSE BUTTON (15) will switch between
play and pause modes. When the unit is in pause mode the PAUSE INDICATOR
(46) in the LCD DISPLAY (1) will glow. The green PLAY/PAUSE BUTTON
(15) LED will also begin to flash repeatedly.
7. FRAME SEARCH
This feature allows you to scroll through a track frame by frame, allowing you to
find and set a starting cue, sample, or loop point. To use the scroll function you
must first be in Pause Mode (see section 5) or Cue Mode (see section 7). Once
you are in Pause or Cue mode, turn the JOG WHEEL (14) to scroll through
the track (Figure 13). Turning the wheel in a clockwise direction will advance the
frame search and turning the wheel in a counter-clockwise direction rewinds the
frame search. When you use the JOG WHEEL (14) the monitor (headphone
level) function allows you to here what you are scrolling through. Once you reach
your desired starting point you can set a cue (starting) point by pressing the
PLAY/PAUSE BUTTON (15) as in Figure 11. Pressing the CUE BUTTON (10) as
in Figure 12 will now return you to the point you just set.
American DJ
AUDIO • Pro Scratch 1™ INSTRUCTION MANUAL • PAGE 11
®
POWER
OFF
ON
Pro-Scratch1
1 2 3 4 5 6 7 8 9 0
EFFECT
SINGLE
LOOP
RELOOP
SEARCH
SCRATCH/
FADE
FLASH 1
MEMORY
SAMPLER
TRACK
FX
MIX
REV
CUE
Figure 13
Figure 11
American DJ
¤
PROFESSIONAL CD PLAYER
PROGRAM
NONSTOP
18
AUTO
--
CUE BPM
CUE
ELAPSED
TOTAL REMAIN
KEY
BEAT SYNC.
LOCK
00 : 00 00
88
160
--
BPM
.
T
M
S
F
PITCH
EJECT/
STOP
SKID/COAST
HOLD
FLANGER/
TRANS/
PARAMETER
SGL/CTN
ECHO
PAN
ON/OFF
ON/OFF
8%/12%/16%
ON/OFF
FLASH 2
FLASH 3
PITCH BEND
IN
SEAMLESS
OUT
RELOOP
LOOP
BOP
SAMPLE PITCH
a
ENTER
FWD
DIGITAL TURNTABLE
DISC IN/OUT SLOT
Figure 12
Advertisement
Table of Contents
