Alpine TME-M790 Owner's Manual page 19

Attaching the AV-Interface Unit
When attaching with Velcro
choose a level location.
Do not attach in a location where the AV-
Interface unit is upside down.
Attach the AV-Interface Unit.
TM
Attach the Velcro Tape included with the AV-
Interface Unit and secure the unit under the
passenger seat, for example.
Foot Brake Lead/Parking Brake Lead Connection
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
1
Vehicle Cable
FOOT BRAKE
(Yellow/Black)
TME-M790
PARKING BRAKE
(Yellow/Blue)
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
TME-M790
(Monitor)
NOTE
If your vehicle has no ACC power supply, add an SPST
(Single-Pole, Single-Throw) switch (sold separately).
If the switched power (ignition) lead of the TME-
M790 is connected directly to the positive (+) post of
the vehicle's battery, the TME-M790 draws some
current (several hundred milliamperes) even when its
switch is placed in the OFF position and the battery
may be discharged.
TM Tape, be sure to
Pinch Connector
Monitor Cable
Stopper
Foot brake lead
Pinch Connector
Pinch Connector
Parking brake lead
IGNITION
(Red)
BATTERY
(Yellow)
2
Foot brake lamp
Foot brake switch
Parking brake lamp
Parking brake switch
SPST SW (Optional)
TM
Velcro Tape (Included)
Plier
Chassis
Battery
Battery
17
-EN
FR
ES
DE
IT
SE