Table of Contents
Advertisement
Installation and Connections
Attaching the monitor and stand
CAUTION
Do not install the monitor near the front
passenger seat air bag system.
<Mount it using the supplied bracket>
•
When mounting with other than the attached Mounting
Bracket, use the attached L shape bracket depending
on usage.
1
Remove the main unit attachment fitting.
Pull this part to release.
Main unit
attachment fitting
2
Loosen the main unit attachment fitting with a coin
etc., slide it into the track on the rear of the main
unit and temporarily fasten it. Then fix it to the
stand.
Slide in an upward
direction.
14
-EN
3
Check the sticking position.
1 Temporarily fasten the stand with gum tape.
2 Loosen the adjustment screws, and adjust to a
safe, viewable position.
The fixed arm tilts towards the
seat side.
Seat side
Main unit
Line of sight
Dashboard
In order to use safely, attach to the following
places.
• Stable and secure places.
• Places that will not have your view blocked by
the main unit when driving.
• Places that you will not hit against if you lean
forward while you wearing your seatbelt.
• Places where the main unit cannot hit against
the steering wheel while driving.
• Be aware that if the surface of the dashboard is leather, wooden
panel, stretched fabric or any non-resin based product, then the
surface will be damaged when you remove the stand.
• Do not place the main unit directly in front of the air conditioner
vents.
Angle
adjustment
screw
Front glass side
If the main unit
invades your line of
sight then it will
block your view.
Advertisement
Table of Contents
