Advertisement
CONNECTED TV AND HOME NETWORK
5
Enter the »Subnet Mask«:
Select the first input position by pressing »
«
Λ
and press » « to activate.
Select the first number by pressing »
« or
V
»
«.
Λ
Select the next digit position by pressing »
>
«
and press » « to activate.
Repeat the procedure for all characters.
Select the push button »Next« with »
« or
V
»
« and press » « to confirm.
Λ
6
Enter the »Gateway«:
Select the first input position by pressing »
«
Λ
and press » « to activate.
Select the first number by pressing »
« or
V
»
«.
Λ
Select the next digit position by pressing »
>
«
and press » « to activate.
Repeat the procedure for all characters.
Select the push button »Next« with »
« or
V
»
« and press » « to confirm.
Λ
7
Enter the »DNS« (Domain Name System):
Select the first input position by pressing »
«
Λ
and press » « to activate.
Select the first number by pressing »
« or
V
»
«.
Λ
Select the next digit position by pressing »
>
«
and press » « to activate.
Repeat the procedure for all characters.
8
Select the push button »OK« with »
« or
V
»
« and press » « to confirm.
Λ
– »Attempting to connect to the wired net-
work« message is displayed, the network
connection is made and the result of the
download test is displayed.
9
After your device is connected to the net-
work, the download bit rate is tested auto-
matically.
Confirm this message by pressing » «.
10
Press »Z« to end the setting.
Note:
Connection info such as »MAC Address«,
7
»IP Address«, »Netmask« and »DNS« can
be see in the »Settings« menu.
11
Press »Z« again to switch to the
»CONNECTED TV« main menu.
30
ENGLISH
------------------------------
Wireless network
Wireless network connection
1
Connect the GRUNDIG WiFi USB Dongle to
the »USB-VOD-WiFi« socket.
Notes:
The GRUNDIG WiFi USB Dongle supports
7
IEEE 802.11 B/G and N communication
protocols. We recommend you to use IEEE
802.11N protocol to obtain the best perfor-
mance in HD video playback.
If you use a modem that supports IEEE 802.
7
11B/G, video playback performance may
be poor when compared to a modem that
supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol
is lower.
The GRUNDIG WiFi USB Dongle must di-
7
rectly be connected to »USB-VOD-WiFi«
socket; USB Hub is not supported.
Please note that video playback perfor-
7
mance in a DLNA application on a wireless
local network and in a Connected TV ap-
plication on a network with internet connec-
tion depends on the number of users on the
network as it is the case in every wireless
network.
CONNECTED TV AND HOME NETWORK
It is recommended to switch off the equip-
7
ment that are not in use in home network in
order to avoid unnecessary network traffic.
Placing the modem or wireless network shar-
7
er on an elevated location will increase the
wireless connection reception strength.
Wireless connection reception strength may
7
vary depending on the type of the modem,
the distance between the modem and televi-
sion and the distance between the device
used as a DMS for DLNA application and
the modem.
Modem must be transmitting its SSID in order
7
to establish a wireless connection. Television
can not connect to a network without SSID.
When a network connection is established
7
with the wireless USB network, the con-
nection may be weak depending on the
strength of the wireless network in the area.
Extending the wireless USB device to a po-
sition that can see the modem with a USB
extension cable will increase the wireless
network performance.
Initial setup
1
Switch on the television set from standby with
8
»
«, »1...0« or »P+« or »P-«.
2
Open the menu with »i«.
3
Select the menu item »CONNECTED TV«
with »
« or »
« and press » « to confirm.
V
Λ
– The line »Open Connected TV« appears.
4
Confirm the option »Open Connected TV«
with » «.
– The »Language« menu appears.
5
Select the menu language with »
« or »
«
V
Λ
and press » « to confirm.
– The »Country« menu appears.
6
Select the country with »
« or »
« and
V
Λ
press » « to confirm.
– The Info menu appears.
7
Confirm the initial network setup configura-
tion with » «.
– The »Settings« menu appears.
------------------------------
Wireless network settings
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1
Select the line »Network« with »
« or »
«
V
Λ
and press » « to confirm.
– The »Settings > Network« menu appears.
2
Select the line »Wireless« with »
« or »
«
V
Λ
and press » « to confirm.
– The message »Scanning...« is displayed
and the wireless networks that are found
appears.
3
Select the network you want to connect with
»
« or »
« and press » « to confirm.
V
Λ
– Wireless connection password menu is dis-
played.
4
Select the first required character with »
«,
V
»
«, »
<
« and »
>
« and press » « to confirm.
Λ
Repeat the procedure for all characters.
Notes:
Select the push button »A,a« for upper
7
case/lower case and press » « to confirm.
For canceling a character, select the push
7
button »
« and press » « to confirm.
5
For entering the password, select the push
button »OK« with »
«, »
«, »
<
« and »
>
«
V
Λ
and press » « to confirm.
31
ENGLISH
Advertisement
