Advertisement
CONNECTED TV AND HOME NETWORK
What is connected TV
Connected TV feature provides your TV the In-
ternet services and pages when it is connected
to the Internet.
You can view YouTube, the popular video shar-
ing environment, and Flickr, the popular photo
sharing environment.
And you can watch TV and listen to radio
through Internet.
With VOD (Video on demand) service, you
can buy or rent movies from video shop and
store them in the TV memory or an external
USB data storage that is connected to the TV.
If you have rented the stored movies than you
can watch them during the rental period on your
television.
If you have purchased them, you can watch
them anytime you want.
This feature is only available in countries where
the service is provided.
Network connection
You can establish a wired or wireless connection
between your television and the local network.
If you want use a wired network connection,
start with the instructions on this page;
if you use a wireless network connection, follow
the instructions in section "Wireless network", on
page 30.
28
ENGLISH
------------------------------
Wired network
Wired network connection
1
Connect the output of external modem to the
»LAN« socket with Cat 5 cable.
Note:
Connection cables are not supplied.
7
Initial setup
1
Switch on the television set from standby with
8
»
«, »1...0« or »P+« or »P-«.
2
Open the menu with »i«.
3
Select the menu item »CONNECTED TV«
with »
« or »
« and press » « to confirm.
V
Λ
– The line »Open Connected TV« appears.
4
Confirm the option »Open Connected TV«
with » «.
– The »Language« menu appears.
5
Select the menu language with »
« or »
«
V
Λ
and press » « to confirm.
– The »Country« menu appears.
6
Select the country with »
« or »
« and
V
Λ
press » « to confirm.
– The Info menu appears.
Confirm the initial network setup configura-
7
tion with » «.
– The »Settings« menu appears.
Note:
Follow the instructions in section "Automatic
7
wired network connection" or "Manual
wired network connection".
CONNECTED TV AND HOME NETWORK
Wired network settings
There are two ways of making the wired network
settings.
A
Automatic wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) are ob-
tained from modem automatically.
B
Manual wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic wired network
connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
Note:
If you do not have a dynamic network, follow
7
the instructions in "Manual wired network
connection" section.
Select the line »Network« with »
« or »
«
1
V
Λ
and press » « to confirm.
– The »Settings > Network« menu appears.
2
Select the line »Wired« with »
« or »
« and
V
Λ
press » « twice.
------------------------------
3
After your device is connected to the net-
work, the download bit rate is tested auto-
matically.
Confirm this message by pressing » «.
4
Press »Z« twice to end the setting.
Manual wired network connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Subnet mask«,
»Gateway« and »DNS« values manually. You
can obtain your »IP Address«, »Subnet mask«,
»Gateway« and »DNS« values from your Inter-
net Service Provider (ISP) or copy them from a
computer connected to the same network by dis-
playing its network settings.
1
Select the line »Network« with »
« or »
«
V
Λ
and press » « to confirm.
– The »Settings > Network« menu appears.
2
Select the line »Wired« with »
« or »
« and
V
Λ
press » « to confirm.
3
Select the option »Manual« with »
« or »
«
V
Λ
and press » « to confirm.
– The »IP address« submenu appears.
4
Enter the »IP address«:
Activate the first input position by pressing
» « and select the first number with »
« or
V
»
«.
Λ
Select the next digit position with »
>
« and
press » « to activate.
Repeat the procedure for all characters.
Select the push button »Next« with »
« or
V
»
« and press » « to confirm.
Λ
29
ENGLISH
Advertisement
