Connecting Other Equipment - Aiwa HT-DV90 Operating Instructions Manual

CONNECTING OTHER EQUIPMENT

Besides the basic connections described earlier
Before making additional connections, be sure to turn of
Wall mounting of the speakers is also described here.
MD recorder, etc.
to OPTICAL OUT jack
to OPTICAL OUT jack
MD player, etc.
AUDIO VIDEO 1 and VIDEO VIDEO 1 jacks
These jacks output and accept video and analog audio signals
to and from the connected equipment.
Connect audio-visual equipment such as a video recorder to
these jacks, using two optional audio-visual connecting cables
with RCA plugs.
• Connect the line output jacks of the equipment to the
input jacks ( AUDIO VIDEO 1 IN L, AUDIO VIDEO 1 IN R, and
VIDEO VIDEO 1 IN) of this unit.
• Connect the line input jacks of the equipment to the
output jacks ( AUDIO VIDEO 1 OUT L, AUDIO VIDEO 1 OUT
R, and VIDEO VIDEO 1 OUT) of this unit.
• Be sure to connect properly according to the color-coding;
AUDIO L: white plugs and jacks
AUDIO R: red plugs and jacks
VIDEO: yellow plugs and jacks
NOTE
• When playing/recording the source through the equipment
connected to the AUDIO VIDEO 1 OUT jacks, set the surround
playback mode to STEREO (page 24).
• The sound selected on this unit'
1 OUT jacks.
• The video is output from the VIDEO 1 OUT
function is VIDEO 2.
• When recording Dolby Digital source through the equipment
connected to the AUDIO VIDEO 1 OUT jacks, dynamic range
can be adjusted (page 29).
, other equipment can be connected to this unit as needed.
f the power and disconnect power supply for this unit and other equipment.
Active
subwoofer
to OPTICAL
IN jack
VIDEO 1
VIDEO 1
s function is output from VIDEO
jack only when the
Video player/recorder, etc.
to LINE OUT jack
to LINE OUT jack
AUDIO VIDEO 2 and VIDEO VIDEO 2 jacks
These jacks accept video and analog audio input signals from
the connected equipment.
Connect audio-visual playback equipment, such as a video player
to these jacks, using an optional audio-visual connecting cable
with RCA plugs.
• Connect the line output jacks of the equipment to the
jacks ( AUDIO VIDEO 2 IN L, AUDIO VIDEO 2 IN R, and VIDEO
VIDEO 2 IN) of this unit.
• Be sure to connect properly according to the color-coding;
AUDIO L: white plugs and jacks
AUDIO R: red plugs and jacks
VIDEO: yellow plugs and jacks
to LINE IN jack
Video player, etc.
VIDEO 2
ENGLISH
En
7