Programed Playback - Aiwa HT-DV90 Operating Instructions Manual

REPEAT PLAYBACK (CDs)
Press SHIFT+REPEAT repeatedly on the remote
control during playback.
With each press, the Repeat playback mode changes:
ONE: Repeats the current track.
TV screen:
REPEAT ONE
ALL: Repeats all tracks on the disc.
REPEAT ALL
OFF: Cancels repeat mode. (Normal playback)
REPEAT OFF
To repeat playback of selected track(s)
Program the track(s) with the programed playback function, and
then press SHIFT+REPEAT to repeat playback of the programed
tracks (see "PROGRAMED PLA YBACK", below).

PROGRAMED PLAYBACK

(CD ONLY)
You can program up to 32 selected tracks to be played back in
your desired order .
If the total playing time of the program exceeds 99 minutes and
59 seconds, the playing time is not displayed properly
Unit' s display
1 Press SHIFT+PRGM on the remote control during
stop.
"PRGM" lights up on the unit'
2 Press 0-9 on the remote control to select the track.
Example:
To select track 12, press 1, 2.
To select track 20, press 2, 0.
3 Press ENTER.
The selected track is programed.
4 Repeat steps 2 and 3 to program other tracks.
5 Press c to start playback.
The programed tracks are played back in the order of entry
To stop programed playback
Press s.
To return to normal playback mode
Press SHIFT+PRGM during stop. At this point, the program is
not cleared. Pressing
programed playback mode.
.
s display .
SHIFT+PRGM again will be back to
ENGLISH
En
.
19