Samsung DVD-V5450 Service Manual page 74

6 If the programme and times are correct, press
the OK button.
7
Press the STANDBY/ON button to activate the
timer.
• The numbers next to each TV programme
listing are ShowView code numbers, which
allow you to programme your videorecorder
instantly with the remote control. Tap in the
ShowView code for the programme you wish
to record.
• Refer to page
- Check that your DVD-VCR has been
programmed correctly
- Cancel a preset recording
ShowView is a trademark of Gemstar Development
Corporation. The ShowView system is
manufactured under licence from Gemstar
Development Corporation.
30 - English
Samsung Electronics
33 if you wish to:
Modifying ShowView
Programming (DVD-V6500)
If you wish to correct the programme displayed or
modify certain elements, such as the recording speed,
you can do so before you press the RETURN button a
second time to confirm.
If you wish to... Then...
1 Press the œ or √ button to select PR.
Select an input
source (AV1, AV2 2 Press the INPUT SEL. button to select AV1,
or AUX) other AV2, or AUX.
than the tuner • The input source must be selected before
changing any other value.
1 Press the œ or √ button to select Day.
Record a
2 Press the ... or † button to select DLY (Daily).
programme every
day (Monday to
Sunday) at the
same time
1 Press the œ or √ button to select Day.
Record a
2 Press the ... or † button to select the
programme every
week on the required day.
same day and at W-SU : Weekly Sunday
the same time W-MO : Weekly Monday
W-TU : Weekly Tuesday
W-WE : Weekly Wednesday
W-TH : Weekly Thursday
W-FR : Weekly Friday
W-SA : Weekly Saturday
1 Press the œ or √ button to select the
Extend the
recording time recording time.
2 Press the ... or † button to set the time.
1 Press the œ or √ button to select Speed.
Select the
2 Press the ... or † button to select the
recording speed
required speed.
Auto SP (Standard Play)
1 Press the œ or √ button to select V/P
Select the
VPS/PDC (VPS/PDC).
2 Press the ... or † button to select On.
recording
• Do not select V/P unless you are sure the
programme you wish to record is broadcast
with VPS/PDC. If you do set V/P to On, then
you must set up the start-time exactly
according to the published TV schedule.
Otherwise the timer recording won't take
place.
Operating Instructions
LP (Long Play)
12-25