Operation Panel Door - Toshiba RD-XS32SB Service Manual

1-1-5. Operation Panel Door

1. Open the operation panel door (1).
2. Release two claws and unhinge the door (1).
1-1-6. RAM Drive
1. Remove the HDD. (Refer to item 1-1-2.)
2. Peel off the tape (1).
3. Disconnect the flexible cables (2).
4. Disconnect the connector (3).
5. Remove two screws (4) and acrylic board (5).
6. Remove four screws (6), then remove the RAM drive (7).
Claw
A
Remove the connector claw
in the direction indicated
by the arrows to release the
flexible cable.
Hinge
Claw
Operation
panel door (1)
RAM
drive (7)
Flexible cable (2)
A
Connector
Flexible
cable (2)
Front panel
Claw
Hinge
Fig. 2-1-5
Connector (3)
Fig. 2-1-6
Screws (6)
Acrylic
board (5)
Tape (1)
Screws (4)
Lay the wire under
the RAM drive (7)