Table of Contents
Advertisement
Seeding Your Garden Starter Tray
It is important to seed your Grow Sponges and get the Tray into your AeroGarden on the same
day. Otherwise, the seeds will start germinating without the benefit of moisture, warmth and
light provided by your AeroGarden.
Place Seeds in Grow Sponge
To avoid confusion, work with only one seed type
at a time.
1
Empty contents of 1 seed packet onto a
piece of paper or clean work surface. For
larger seeds, you may be able to grab seeds
right from seed packet.
2
Count out the number of seeds needed
for one Grow Sponge. For example, take
4 seeds if you are planting beets. (Use the
table on page 7 of this Guide to help you
decide the number of seeds to plant in each
Grow Sponge.)
3
Drop seeds into the Dibble with your fingers
or tweezers.
4
Mark Seeding Plan to indicate which Grow
Sponges are planted.
5
Repeat steps until all Grow Sponges for that
seed type are planted.
6
Return unused seeds to packet.
HELPFUL HINTS:
To avoid losing track of where you are on the Seeding Plan:
• Plant all of one seed type at a time.
• Start planting seeds on one side of the Tray and work your way across (rather than jumping around).
• Remember to check off each Grow Sponge on the Seeding Plan as you get it planted. (This way if you
get distracted, you'll know where you stopped!)
• If you accidentally put in an extra seed or two, don't worry. There is still plenty of room for seeds to
germinate and plants to grow.
9
(Continued)
Advertisement
Table of Contents
