AeroGarden 100340 Quick Start Manual page 15

Prepare For Your Next Garden
Replanting Your AeroGarden
If you have already grown a garden in your Space•Saver 6, please follow the instructions below to
reset the nutrient timer:
• Press and HOLD "Reset" button until red "Add Nutrients" light blinks (approximately 6 seconds).
• Release "Reset" button. "Add Nutrients" light will turn off.
• Your Space-Saver 6 is now reset.
Add
Nutrients
Reset
Add Nutrient
More Reminders...
REMOvE BIO-DOMES
When plants appear through the hole in
the Seed Pod Labels, remove Bio-Dome and
discard or recycle.
(In some cases you may see other lights blink as well. This is nothing to worry about.)
Replace
Bulbs
Reset
WATER LEvEL LOW
When indicator is RED, add water to "Fill To Here" below
View Door.
Water level indicator gradually changes from red to green as water is
added. Water level indicator is completely GREEN when Bowl is full.
View Door
(continued
Add
Nutrients
Replace
Bulbs
Add Nutrient
Grow Surface
)
24-Hour
Light
Water level Indicator
14