Assigning An Ip Address - Axis 1610 User Manual

Section 3: Installation
16

Assigning an IP address

Before you start
System privileges
Ethernet address
IP address
Important
To establish communication with the TCP/IP network and to
enable Web browser and Netspot management, an IP address
must be assigned to your AXIS 1610.
You need root privileges on your UNIX system, or administrator
privileges on a Windows NT server to set the IP address using
RARP, BOOTP or DHCP.
You need to know the Ethernet address of your AXIS 1610 to
perform the installation. The Ethernet address is based on the
serial number of your AXIS 1610. This means, for example, that
an AXIS 1610 with the serial number of 00408C100086, will
have the corresponding Ethernet address of 00 40 8C 10 00 86.
The serial number is located on the label of the print server.
You must obtain an unused IP address from your network
administrator, unless you have automatic IPaddress assignment
e.g. DHCP on your network.
❏ DO NOT use the IP addresses used in the following examples
when installing your AXIS 1610. Always consult your network
administrator before assigning an IP address to your AXIS 1610.
AXIS 1610 User's Manual