Connection Panel - Roland FR-7 Owner's Manual

Connection panel

R TO FBC-7 socket
Use the supplied cable to connect this socket to the
supplied FBC-7 power supply/footswitch unit/bat-
tery charger. This may be necessary in the following
cases:
• To power the FR-7/FR-5 without using the supplied
battery. In most instances, this may be unnecessary,
because the supplied battery (FR-7) lasts up to 8
hours.
Note: See also "Connecting the FBC-7" on p. 30 for details
about maximizing the life span of the battery.
• To be able to control certain functions by foot (see
p. 30).
• To use the FR-7/FR-5 as a MIDI controller (only the
FBC-7 has MIDI sockets).
R
S OUTPUT L/MONO & R/MONO sockets
These sockets can be connected to an amplifier, a
mixing console or a wireless system.
If you use both connectors, the FR-7/FR-5's output is
stereo. If you only use one jack (connected to the "L"
or "R" socket), the FR-7/FR-5's output is mono.
Note: If you don't want to use a wireless system, consider
connecting the FR-7/FR-5 to the FBC-7 when you need to
connect it to an external amplifier.
Note: On the FR-7, connecting jacks to these sockets does not
mute the internal speakers.
T PHONES socket
This is where you can connect stereo headphones
(Roland RH-25, RH-50 or RH-200). On the FR-7, con-
necting a pair of headphones mutes the internal
speakers.
V-Accordion
S
T
r
Connection panel
13