Battery Compartment; Connection Panel - Roland V-Accordion FR-1x Owner's Manual

FR-1x V-Accordion
Panel descriptions

Battery compartment

Connection panel

S DC IN socket
This is where you need to connect the supplied power
adapter (PSB-1U). Note that you can also purchase 8
rechargeable AA-type Ni-MH batteries and use the
FR-1x without the adapter.
T MIDI OUT socket
This socket can be used to transmit MIDI data.
U USB COMPUTER port
This port can be connected to one of your computer's
USB ports (see p. 63). Please use a commercially
available USB cable.
V OUTPUT L/MONO (TREBLE) & R/MONO (BASS)
sockets
These sockets can be connected to an amplifier, a
mixing console or a commercially available wireless
system. If you use both connectors, the FR-1x's out-
put is stereo. In that case the signals of the Treble
section are transmitted to the L/MONO socket, while
the R/MONO socket transmits the bass (and chord)
signal. If you only use one jack (connected to the "L"
or "R" socket), the FR-1x's output is mono.
14
R
T
S U
W PHONES socket
R Battery compartment
This is where you install 8 commercially
available rechargeable AA-type Ni-MH
batteries (see p. 16).
V
W
NOTE
On the FR-1x, connecting jacks to these sockets does not
mute the internal speakers.
NOTE
Using these sockets and switching off the FR-1x's speakers
(see "Speaker Mode" on p. 55) allows you to save battery
power.
This is where you can connect stereo headphones
(Roland RH-series).
NOTE
Connecting a pair of headphones mutes the internal speak-
ers.