Table of Contents
Advertisement
3-4
Cooling Fan Installation and Removal
If your M14T mobile rack is a stand-alone model, you will need to install the cooling
fan onto the M14T before operating it.
Installing the Cooling Fan
1.
Place the cooling fan on the M14T mobile rack, aligning the mounting holes in
the fan housing with the holes on the mobile rack.
2.
Secure the fan to the mobile rack with two screws on each side of the fan.
3.
Connect the cooling fan cable to the fan connector as illustrated.
2
1
To remove the cooling fan, simply reverse the procedure above:
Removing the Cooling Fan
1.
Disconnect the cooling fan cable.
2.
Remove the screws securing the fan to the M14T
3.
Remove the fan from the M14T.
Safety Information and Technical Specifi cations
1
1
Figure 3-1: Installing the Cooling Fan
3-3
Advertisement
Table of Contents
