Set Supervisor/User Password; Save & Exit Setup - Biostar M6VCG User Manual

2.11 Set Supervisor/User Password

#"
Figure 11. Set Supervisor/User Password
CMOS Setup Utility-Copyright (C ) 1984-1999 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Esc : Quit
F10 : Save & Exit Setup
When you select this function, the following message will appear at the center of the screen to assist you in
creating a password.
Type the password, up to eight characters, and press <Enter>. The password you type now will clear any
previously entered password from CMOS memory. You will be asked to confirm the password. Type the
password again and press <Enter>. You may also press <ESC> to abort the selection and not enter a
password. To disable password, just press <Enter> when you are prompted to enter password. A message
will confirm that you wish to disable the password. Once the password is disabled, the system will boot and
you can enter setup freely.
If you select "System" at the Security Option of BIOS Features Setup Menu, you will be prompted for the
password every time the system is rebooted or any time you try to enter Setup. If you select "Setup" at
Security Option of BIOS Feature Setup Menu, you will be prompted only when you try to enter Setup.
2.12 Save & Exit Setup
#"
Figure 12. Save & Exit Setup
CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
SAVE to CMOS and Exit (Y/N) ? Y
PnP/PCI Configurations
Esc : Quit
F10 : Save & Exit Setup
Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS RAM.
Type "N" will return to Setup Utility.
Enter Password :
F9: Menu in BIOS
Change / Set / Disable Password
ENTER PASSWORD
PASSWORD DISABLED
F9: Menu in BIOS
Save Data to CMOS
34
PC Health Status
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
PC Health Status
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
BIOS Setup