Sharp LC-32LD164E Service Manual page 45

SHARP_2K14_MT5561_NUCLEUS_EU_
SHARP_2K14_MT5561_NUCLEUS_UK_
SHARP_2K14_MT5561_NUCLEUS_EU_2G_
Example:
a) SHARP_2K14_MT5561_NUCLEUS_EU_V0.42.1_20131214.pkg : for SHARP EU
b) SHARP_2K14_MT5561_NUCLEUS_UK_V0.42.1_20131214.pkg : for SHARP UK
c) SHARP_2K14_MT5561_NUCLEUS_EU_2G_V0.42.1_20131214.pkg : for SHARP EU_2G
V. TV's LED will ash during upgrade process, after finished upgrade process, TV will
reboot by itself.
VI. Remove USB disk from TV.
VII. Check if the software version is correct.
(Menu → Setup → Version Info)
10.4 Connect by USB flash Memory
1) Please put sowtware in USB memory. (do not put any other data except a software in the USB memory)
2) Disconnect the AC cord in the condition that TV is on (do not press any buttons on the TV).
3) Connect the USB memory to the TV.
4) Connect AC cord to the TV (do not press any buttons on the TV).
5) LED will be blinking (SW upgrade will be in progress).
When the upgrade finishes, TV will show the picture and sound.
Please do not turn off the TV during the software upgrade. )
2K14 SHARP EU/EU_2G/UK Family
TYPE :
BRAND :
Prefix text
45
Model
TPV OEM 50/42LD264/265, 32LD164/165 series (EU)
TPV OEM 50/46/42LD266, 32LD166 series (UK)
TPV OEM 46LD264/265 series (EU_2G)
LC-32LD164
LC-32LD165
LC-32LD166