Table of Contents
Advertisement
Pay attention to the instructions on how to connect the boiler to the heating system. When installing
the boiler, it is necessary to follow the rules and standards of heating systems in force in the country of
its installation:
The boiler may only be installed by a technician who complies with the applicable laws and requirements
and knows the workings of the heating system. The quality of the boiler installation must be confirmed
by the installer by issuing a certificate of installation works.
The boiler is used to heat the water of the heating system. The maximum outgoing water temperature
is 85 °C, allowed operating pressure at the lowest point of the heating system – 1,5 bar. Technical data
is presented in the annex table. Pellet boiler composition:
1. Boiler
2. Pellet hopper
3. Burner
4. Snout
5. Telescopic pipe
6. Turbulators
7. Smoke outlet
8. Coupling for thermometer
9. Heated water pipe
10. Return water pipe
11. Upper door
12. Lower doors
13. Hopper cover
14. Coupling for safety valve
15. Pellets
16. Heat exchanger
17. Air heating tank
18. Rollers system
19. Pellet feed unit
TECHNICAL PASSPORT, INSTALLATION AND MAINTENANCE MANUAL
2 PRODUCT DESCRIPTION
2.1 General information
2.2 Pellet boiler
5
Advertisement
Table of Contents
