Samsung Sprint SPH-Z400 User Manual page 70

Making a TeamDC Call
1.
Press Menu > History
2.
Select a TeamDC group and press the Direct
Connect button.
3.
Continue the TeamDC call as any other Direct
Connect or Group Connect call.
4.
When you are finished, press
(When you end a TeamDC call that you initiated, all
other participants are dropped from the call.)
Note Group Termination Options By default, when the
originator of a Group Connect or TeamDC call ends
the call, all other participants are disconnected as
well. When available, you will be able to select a
setting in Settings > Direct Connect > Group Call
Options to allow Group Connect and TeamDC calls
you initiate to remain active after you leave the call.
54 Section 2B. Nextel Direct Connect
.
to end the call.
Joining or Rejoining a TeamDC Call
If you are not available at the beginning of a call, or if
you drop off the call temporarily, you can rejoin the
in-progress TeamDC call.
1.
Press
Menu > History
2.
Select the TeamDC entry and press the Direct
Connect button.
3.
Continue the TeamDC call as described previously.
Tip You can also join or rejoin a TeamDC call from your
Contacts. Select the TeamDC group and press the
Direct Connect button.
Note If the TeamDC call has already ended, pressing the
Direct Connect button initiates a new TeamDC call.
.