Table of Contents
Advertisement
Making a Group Connect Call On-the-Fly
1.
Press
Menu > Contacts > Add New > New Group
2.
Press
(left softkey) to add Contacts entries with
Start
DC-capable numbers to the group.
When adding a contact for the Group Connect
call, make sure you highlight the entry's
DC-capable number (
3.
When you have finished selecting entries, press
the Direct Connect button.
4.
Continue the Group Connect call as described
previously.
Joining or Rejoining a Group Connect Call
If you are not available at the beginning of a Group
Connect call, or if you drop off the call temporarily, you
can rejoin an in-progress Group Connect call.
1.
Press
.
Menu > History
2.
Select the call and press the Direct Connect
button.
3.
Continue the Group Connect call as described
previously.
.
or
).
DC Only
Mobile + DC
Tip
You can also join or rejoin a Group Connect call from
your Contacts list if the group has been stored.
Select the group entry and press the Direct Connect
button.
Note
If the Group Connect call has already ended,
pressing the Direct Connect button initiates a new
Group Connect call.
If you do not want to participate in a Group Connect
call, press END .
To see an updated number of group participants
after rejoining a call, press the Direct Connect button.
Setting Group Termination Options
1.
Press
Menu > Settings > Direct Connect > Group Call
Options
.
2.
Select an option and press
End the call for everyone
for all connected members.
Allow the call to continue
after you hang up. The call will remain active until
the last members disconnect.
Section 2B. Nextel Direct Connect
.
: terminates the call session
: keeps the call active even
51
Advertisement
Table of Contents
