Samsung Replenish SPH-M580 User Manual page 167

2.
To manually add your new network connection:
Touch
Add Wi-Fi network
Enter the Network SSID. This is the name of your
Wi-Fi network.
Tap the field and select a security option.
Security
This must match the current security setting on
your target network.
If secured, you will also need to enter the wireless
password. The
show password
password as you type it instead of showing only
asterisks (****).
Tap to store the new information and
Save
connect to the Wi-Fi network.
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
To manually scan for a Wi-Fi network:
1.
Press
>
Wireless & networks > Wi-Fi settings.
2. Press and tap
.
option, reveals the
> >
.
Scan
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Wi-Fi Settings Menu
The
Wi-Fi settings - Advanced
up many of your device's Wi-Fi service, including:
Setting your Wi-Fi sleep policy
Viewing your device's MAC Address
Configuring use of either a DHCP or Static IP
To access the Wi-Fi Settings menu:
1.
Press
>
Wireless & networks > Wi-Fi settings
2. Press and tap
3B. Web and Data Services
menu allows you to set
> >
.
.
Advanced
153